;
top of page
Search

When is a flexible LED screen worth it?

Writer: Mobile Event
Mobile Event
Oct 24
4 min read

Updated: Oct 30

In short: a flexible LED screen is worth it when the shape of the screen is part of the idea: a column or cylinder around a pillar, an arc that wraps around the audience, a wave, a tunnel, or a product placed in the center of a circle of images. For a straight presentation screen, rigid panels give the same result with faster setup and standard content.

Updated: October 2026. Written by George Știrbei, Managing Director and Founder of Mobile Event.


What is a flexible LED screen?

It is an LED screen built from cabinets that can tilt relative to each other to form curves, circles and angles. The image stays continuous across the whole shape.


There are 3 categories on the rental market, and it helps to know which one the quote you receive falls into:

Type

How much it curves

Where it is used

Rigid panels with curve locks

Up to about 10° between panels

Slightly concave indoor screens

Flexible rental cabinets

Up to ±45° between cabinets

Cylinders, arcs and S-shapes at events

Soft magnetic modules

Bends to fit the frame

Permanent installations, several days to install


Mobile Event works with the second category: 400 FLEXX Xtra cabinets, P2.9, each 500×500×73 mm and 7.5 kg, with an adjustable angle of ±45° and IP65 protection. They are part of the 1,200 LED cabinets in inventory, alongside 800 rigid cabinets: Creative LED P3.9 plus 160 outdoor P4.8 cabinets.


What shapes can you build?

The cylinder is the most requested shape. 8 cabinets in a row close a circle 1.27 m in diameter. Each row adds 0.5 m of height.

Cabinets per row

Diameter

Circumference

8

1.27 m

4 m

16

2.55 m

8 m

24

3.82 m

12 m

32

5.09 m

16 m


Flexible LED cylinder showing animated jellyfish, installed in a luxury hotel lobby
A flexible LED cylinder in the middle of a lobby is visible from every direction.

Besides cylinders: concave or convex arcs, S-shapes, waves, rounded corners and 3D volumes. Flexible cabinets can be combined with Creative LED panels in the same set design, because they use the same Novastar processing.


When is it worth it?

  • Pillars in the room. A structural pillar in the middle of the room, wrapped in an LED cylinder, becomes a column of images.

  • Product launches. The product sits in the center and the image surrounds it. A 2.55 m or 3.82 m cylinder fits around a podium or a product up to about 2 m wide. For a car, the right shape is an arc behind it.

  • An arc around the audience. An 8×3 m concave screen brings the image into the peripheral vision of the front rows.

  • Exhibition booths. An LED column is visible from every direction in the hall. A flat screen is only visible from the front.

  • Galas and festival stages. Cylinders on the sides of the stage, synced with the central screen.

  • Entrance tunnels. Guests walk through an arc of images before they enter the room.


Set design made of flexible LED screens shaped as cylinders and a wave, showing a mountain landscape, in a historic hall with a chandelier
Cylinders and waves made from flexible cabinets can form a single set design.

When is it not worth it?

  • Conference presentations on a straight screen. The shape adds nothing, and rigid panels go up faster.

  • Setup in a few hours, with no rehearsal. Curved shapes need alignment and a content test.

  • No content budget. A cylinder runs content made for it. A 16:9 slide on a cylinder looks cut off from any angle.

  • Tall cylinders outdoors, in the wind. A cylinder catches wind from every direction and needs a structural calculation.


What do you need to know about content?

A cylinder has no “front”. Content is made for the unrolled surface of the cylinder: a long rectangle whose width equals the circumference.

Example: a cylinder 1.27 m in diameter and 2 m tall has 8 cabinets around the circumference and 4 rows. At P2.9, each cabinet has 168×168 pixels. The unrolled surface is therefore 1,344×672 pixels.

The graphic designer gets a pixel map with the exact dimensions and the seam point marked. If the audience sees the cylinder from all sides, the content is made as a seamless loop, with no visible start or end.


How long does setup take, and how much does it weigh?

A 1.27×2 m cylinder has 32 cabinets, weighs about 240 kg and takes 2 technicians about 2 hours to set up. A 4 m tall cylinder reaches about 480 kg and needs a calculated base and rigging.

To book, plan at least 2 weeks ahead for a standard project and 4 weeks when the screen is part of a reveal synced with lighting and sound. More configurations are on our flexible LED screen page, and setups by event type are on our events page.


Frequently asked questions

How small can an LED cylinder be?

With FLEXX Xtra cabinets, the minimum diameter is 1.27 m, from 8 cabinets per row. Height grows by 0.5 m per row.

Can a flexible LED screen be used outdoors?

Yes, if it has IP65 protection. The FLEXX Xtra cabinets in the Mobile Event inventory are IP65. For tall outdoor cylinders, the structure is calculated for wind load.

What is the difference between a curved LED screen and a flexible one?

Rigid rental panels curve up to about 10° between them, enough for a slightly concave screen. Flexible cabinets reach ±45°, so they can close circles and S-shapes.

Can I combine a flexible screen with a flat LED screen?

Yes. Flexible cylinders or arcs can run in sync with a flat central screen, from the same video control room. At Mobile Event, both panel types use Novastar processing.

Can a flexible LED screen be filmed?

Yes. FLEXX Xtra cabinets have a refresh rate of 3,840 Hz or higher, the threshold used for professional filming.

Sources

 
 
bottom of page